|
Product
Picture
|
Part
No.
|
Description
|
Return to Grills & Back-boxes Index |
Round Grills & Enclosures for 8" Speakers
For Vandal Resistant Required Locations
|
|
Dimensions |
 |
G24W
|
- 12-3/4"
Round Vandal Resistant baffle for an 8" Speaker.
- Use with
E10 enclosure for recessed (flush) mounting.
- Complete
with tamper-resistant hardware and a stainless steel woven mesh that
goes between the grille and the speaker.
- Heavy gauge die stamped steel, powder coated finish.
- Driver bit set
is available optionally, specify part number H-BIT-100.
|
 |
 |
E10 |
- 4" deep, for recessed / flush mounting.
- Flange is
formed out. Not recommended for concrete.
- Acoustically
dampened.
- Mounting
clips included
|
 |
 |
G11W |
- 12-3/4" Round, NOT - Vandal Resistant baffle for an 8" Speaker.
- This baffle is part of the vandal resistant family for install purposes. If you wish to keep back boxes standard on the site, it is possible with this baffle.
- Use with E10 enclosure for recessed (flush) mounting.
- Complete with standard hardware.
- Standard Gauge Die Stamped CRS, powder coated white finish.
|
 |
Square Grills & Enclosures for 8" Speakers
For Vandal Resistant Required Locations
|
|
Dimensions |
 |
G23W
|
- 11-1/2"
square vandal resistant baffle for an 8" Speaker.
- Use with
either E23 enclosure for recessed(flush)mounting, or the SE23
enclosure for surface mounting.
- Complete
with tamper-resistant hardware and a stainless steel mesh that
goes between the grille and the speaker.
- Fully welded
corners, heavy gauge steel, powder coated finish
- Driver bit set
is available optionally, specify part number H-BIT-100
|
|
 |
E23 |
- 10-5/8"
square, 3-3/4" deep, for recessed mounting of the speaker.
- Flange is
formed in
- Can be installed
into poured in place concrete walls.
- Acoustically
dampened.
- Mounting
clips included
|
|
 |
SE23 |
- 11-1/2"
square, 4" deep for surface mount conditions
- Back is closed
type.
- Made from
very heavy gauge cold rolled steel and painted an off white to
match the baffle above.
- Pressed in baffle mounting nuts make for a solid assembly
|
 |
 |
G49W |
- 11-1/2" square NOT - vandal resistant baffle for an 8" Speaker.
- This baffle is part of the vandal resistant family for install purposes. If you wish to keep back boxes standard on the site, it is possible with this baffle.
- Use with either E23 enclosure for recessed(flush)mounting, or the SE23 enclosure for surface mounting.
- Complete with standard hardware.
- Standard Gauge CRS, powder coated white finish.
|
|
. This document is maintained by 